copper clad aluminum bus bar manufactured by horizontal continuous casting method

We're gonna get the molten copper into the vacuum composites and then we're gonna get the copper pipe.

After formation,the dissolved aluminum fluid enters the copper pipe.

Aluminum and copper on the inner wall of the fused copper pipe at high temperatures

Interfused to form an interface fusion.

The copper and aluminum that formed the surface fusion react chemically react.

The new compound is formed through the formation of new interatomic compounds.

Combination (metallurgical combination) is completed,resulting in an Interface

Response realized.

Two metal liquids,a composite mold,a secondary tertiary,correct.

After cooling and forming a stable crystal zone,

(This area is a sealed area filled with metal liquids and is inaccessible to gas)

The Sheared Bullet (Bar) coagulated through the movement processor

Once withdrawn,the copper aluminum Bullet is completed.

Advantages of Horizontal Continuous Casting

-The composite molding of the product is stable and reliable.

-The production process is short,eco-friendly and efficient.

-High binding performance due to metallurgical bonding of copper aluminum mating surface.

-Because of weight reduction,transportation and assembly are excellent and cost reduction is high,it is possible to save resources with copper alternative ma-terials and has a high challenge rate.

-Large copper layer thickness regulation range and high current transmission is possible.