CCA Busbar manufactured by horizontal continuous casting method

We're gonna get the molten copper into the vacuum composites and then we're gonna get the copper pipe.

After formation,the dissolved aluminum fluid enters the copper pipe.

Aluminum and copper on the inner wall of the fused copper pipe at high temperatures

Interfused to form an interface fusion.

The copper and aluminum that formed the surface fusion react chemically react.

The new compound is formed through the formation of new interatomic compounds.

Combination (metallurgical combination) is completed,resulting in an Interface

Response realized.

Two metal liquids,a composite mold,a secondary tertiary,correct.

After cooling and forming a stable crystal zone,

(This area is a sealed area filled with metal liquids and is inaccessible to gas)

The Sheared Bullet (Bar) coagulated through the movement processor

Once withdrawn,the copper aluminum Bullet is completed.

Advantages of Horizontal Continuous Casting

-Product complex molding is stable and reliable.

- The production process is short,eco-friendly,and efficient.

-Good binding performance due to metallurgical bonding of copper aluminum mating surfaces.

- Due to weight reduction,transportation and assembly are excellent and cost reduction is high,so resources can be saved and the challenge rate is high.

-Layer thickness adjustment range is large and high current transmission is possible.