TEMP-IR MULTI adopts a non-contact temperature measurement method to be suitable for places where it is difficult to measure temperature,such as a switchboard or distribution board,such as an overheating prevention system or a difficult place,that is,an overheating prevention system or a part requiring difficult temperature measurement. Designed by TEMP-IR MULTI can get the target temperature of 64 pixels by built-in Array sensor,and it has built-in temperature calculation processor,so it outputs accurate temperature value to Master controller without temperature calculation algorithm. In addition,multiple temperatures can be monitored in conjunction with a display device.

Product Features

The built-in 16 x 4 array sensor allows you to obtain the target temperature of 64 pixels at the same time. It can realize a thermal image. It is easy to know the location of the high heat distribution on the measurement target. It is possible to determine the temperature of the desired object surface without touching it Exactly within 250ms

It is a module that can measure. It can measure the target temperature and the ambient temperature of the sensor module at the same time. It is easy to know the measurement direction by attaching a laser pointer. It has a built-in processor dedicated to temperature calculation,so you can measure precise temperature. Emissivity can be adjusted according to the characteristics of objects. It is possible to measure the temperature of an accurate target using the MODBUS RTU method,which is well known as an industrial protocol.

Basic specifications

Power:5Vdc,Current consumption:49.20mA (On Laser:60.20mA) Communication:MODBUS RTU 485 Temperature measurement range:-30℃ ~ 300℃ Operating temperature:-20℃~70℃(Sensor),-10℃~ 40℃ (laser)